Assembled E3D V6 All metal hotend 1.75mm V6 Hotend Bowden Extruder 0.4mm Nozzle

The E3D v6 has been redesigned from the ground up. The designer has invested a lot of time and used all of their experience to design the latest and greatest  e3d v6 hotend assembly. 

Print the Widest Range of Materials Possible.

Building on their signature high temperature performance, that allows you to print high temperature materials, they have now focused on adding increased functionality with soft and flexible filaments. By providing a PTFE liner tube through the hot end that you can extend into your extruder. E3D v6 direct drive gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments like NinjaFlex, FlexPLA and FlexPolyester. This opens up a huge range of new opportunities for your printer.

High Temperature Peformance.

With no PEEK or PTFE in hot regions of the hot end, you can reach 300C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 400C.

E3D v6 direct drive not only allows you to print extremely high temperature materials like polycarbonate and nylons but also eliminates hot end meltdown failures associated with PEEK/PTFE designs. Although the latest E3D v6 direct drive 1.75mm has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.