Pack of 2 MG995 High Speed Torque Servo motor

The MG995 is a popular, full-sized digital metal gear servo motor known for delivering high torque at a relatively low cost. It is widely used in RC vehicles (cars, boats, helicopters), robotic arms, and DIY Arduino or Raspberry Pi automation projects.

Core Specifications
Operating Voltage: 4.8V to 7.2V 
DCStall Torque: 13 kg·cm (at 4.8V) to 15 kg·cm (at 6.0V)
Operating Speed (No Load): 0.17 sec/60° (at 4.8V) to 0.13 sec/60° (at 6.0V)
Rotation Angle: Typically available in 180° (90° each direction) and 360° (continuous rotation) variants
Weight: 55 g
Dimensions: 40.7 × 19.7 × 42.9 mm

Hardware & Electronics
Gear Material: Metal gears for durability and stripped-resistanceBearing
Type: Dual ball-bearing design (reduces friction and ensures smooth movement)
Motor Type: Coreless motor for fast response and strong holding power Connector:

Important Operational Rules
Power Supply: Do not power the servo directly from an Arduino or microcontroller (e.g., the 5V pin). It draws high stall currents (often 1A to 2A) which can reset or damage your board. Use an external 5V to 6V power supply with a common ground.
Pulse Width: Standard 180° servos operate using a pulse width between roughly 900µs and 2100µs.